Datalogic Scanning Jet - Manual (Page 84)

DATALOGIC JET™
3
3.8.3 FTP Server Setup
The Datalogic Jet™ Windows CE Operating System includes a sample File Transfer
Protocol (FTP) server. FTP is used for copying files to and from remote computer
systems over a network using TCP/IP. You can establish a connection to your
Datalogic Jet™ using its FTP Server through the following interfaces:
WLAN using the Wi-Fi radio
LAN through the Datalogic Jet™ Ethernet Multi Cradle (see par. 3.7.5)
Proceed as follows:
1. Create a registry file (extension .reg) to setup and enable FTP Server
communication. A simple example file for anonymous logon is given below:
REGEDIT4
[HKEY_LOCAL_MACHINE\Comm\FTPD]
"DefaultDir"="\\"
"AllowAnonymousUpload"=dword:00000001
"UseAuthentication"=dword:00000000
"BaseDir"="\\"
"IsEnabled"=dword:00000001
"LogSize"=dword:00001000
"DebugOutputMask"=dword:00000017
"DebugOutputChannels"=dword:00000002
"IdleTimeout"=dword:0000012c
"AllowAnonymous"=dword:00000001
"AllowAnonymousVroots"=dword:00000001
2. Copy this file to the Datalogic Jet™ using ActiveSync
® .
3. Launch the .reg file from the Datalogic Jet™.
4. Perform a warm boot on the Datalogic Jet™.
5. From the PC > Explorer address bar (or running an FTP Client from the PC),
enter the Datalogic Jet™ IP address.
NOTE
For more information on FTP Client/Server connections refer to the
following web page:
http://msdn2.microsoft.com/en-us/library/aa922316.aspx.
68