ADLINK PXES-2780 - Manual (Page 36)

26 Getting Started
5. Fasten the screws on the module’s front panel.
6. Repeat steps 1 to 5 to install additional PXI peripheral
modules.
.
2.4 Rack Mounting
ADLINK provides hardware for optional installation of the PXES-
2780 to a rack. The kit (order name PXES-2780 Rack Mount Kit)
flexibly recesses the PXES-2780 in the rack, accommodating
external mechanical parts on the front side, such as cables and
mass interconnect modules.
NOTE: NOTE:
To improve efficiency of heat dissipation, after installing all PXI
modules, please install filler plates for any unused slots.
PRELIMINARY