ADLINK PXES-2780 - Manual (Page 37)

Getting Started 27
PXES-2780
Figure 2-1: Rack Mount Assembly
Table 2-1: Rack Mount Assembly Legend
1. Remove the four rubber feet from the left side
2. Install the mounting brackets on both sides of the chas-
sis using the provided M4 screws. Position of the mount-
ing brackets can be adjusted via a range of screw holes
to recess the chassis in the rack by any distance
3. Install the chassis in the rack using eight screws (not
included).
A 4 Rubber Feet (only 2 shown)
B Mounting Brackets
A
B
B
PRELIMINARY