A.3 maintenance, A.3.1 handling the chassis, A.3.2 cleaning the exterior – ADLINK PXES-2780 User Manual
Page 51: A.3.3 power requirements, Maintenance, A.3.1, Handling the chassis, A.3.2, Cleaning the exterior, A.3.3
Troubleshooting and Maintenance
41
PXES-2780
A.3 Maintenance
A.3.1
Handling the Chassis
The PXES-2780 is designed for both rack-mount and benchtop
use. When transporting or carrying the chassis, it is recom-
mended that the handle be used, being designed to support the
weight of the chassis for superior portability and balance.
The PXES-2780 weights 8.8 kg. Please be careful when moving
the chassis to avoid any possible injury.
A.3.2
Cleaning the Exterior
Make sure that the system is turned off before cleaning the chas-
sis exterior. Wipe the exterior with a clean cloth starting from areas
that easily accumulate dust or dirt such as the area in and around
the chassis and power supply air intake apertures.
A.3.3
Power Requirements
Make sure that the power cord is in good condition before plugging
it into the system. It is important to check the reliability of the
power source. The PXES-2780 power supply is capable of han-
dling 100 to 240 V AC within the 50 Hz to 60 Hz range. Do not
connect the PXES-2780 to an already overloaded circuit.
PRELIMINARY