ADLINK PXI-9527 - Manual (Page 28)

18 Getting Started
The PXI-9527 I/O array is labeled to indicate connectivity, as
shown.
Figure 2-2: PXI-9527 I/O array
2.4 Installing the module
1. Turn off the PXI system/chassis and disconnect the
power cable from the power source.
2. Align the module’s edge with the module guide in the
PXI chassis.
3. Slide the module into the chassis until resistance is felt
from the PXI connector.
4. Push the ejector upwards and fully insert the module into
the chassis.