ADLINK ND-6520 - Manual (Page 69)

NuDAM-6521 • 65
5.4.9 Set RTS Status
@Description
Set the RS-232 RTS signal to specified value.
@Syntax
$(Addr)0(RTS Status)<CR>
$ Command leading code. (1-character)
(Addr) Address ID (2-character)
0 Set RTS Status command
(RTS Status) 0 : Set RTS Status to 0
1: Set RTS Status to 1
@Response
!(Addr)<CR>
or
?(Addr)<CR>
! Command is valid
? Command is invalid.
(Addr) Address ID.
@Example
User command: $3001<CR>
Response: !30<CR>
30 Address ID
0 Set RTS Status command
1 Set the RTS signal to 1