ADLINK aTCA-6200A - Manual (Page 27)

27
3.3.5.3 Select Front Panel RJ-45 COM Port Mode
Use switches SW9 and SW10 located on the solder side of the aTCA-6200 to select the operating mode
for front panel RJ-45 COM port. Users can choose RS-232 Mode for standard RS-232 COM port or IPMC
Debug Mode which routes the front panel RJ-45 COM port to the IPMC.
Configuration Switch Pin 1 Pin 2 Pin 3 Pin 4
SW9 On On Off Off
RS-232 Mode
(default)
SW10 On Off Off Off
SW9 Off Off On On
IPMC Debug Mode
SW10 Off On On On
SW9
SW10