ADLINK aTCA-6200A - Manual (Page 28)

28
4 Hardware Platform Management
4.1 Platform Management Overview
The purpose of the hardware platform management system is to monitor, control, and assure proper
operation of AdvancedTCA® Boards and other Shelf components. The hardware platform management
system watches over the basic health of the system, reports anomalies, and takes corrective action
when needed. The hardware platform management system can retrieve inventory information and
sensor readings as well as receive event reports and failure notifications from Boards and other
Intelligent FRUs. The hardware platform management system can also perform basic recovery
operations such as power cycle or reset of managed entities.
The IPMI controller on aTCA-6200 supports an “intelligent” hardware management system, based on
the Intelligent Platform Management Interface Specification. The hardware management system
provides the ability to manage the power, cooling, and interconnect needs of intelligent devices; to
monitor events; and to log events to a central repository.
4.2 IPMI Sensors
Following table shows all the sensors which aTCA-6200 supported.
Item Sensor Name
Sensor
Address
Description
(1) Hot Swap (0x0) FRU Hotswap Sensor. Please refer to section 4.2.1
(2) Hot Swap AMC 1 (0x1) AMC#1 Hotswap Sensor. Please refer to section 4.2.1
(3) RTM Hot Swap (0x2) RTM Hotswap Sensor. Please refer to section 4.2.1
(4) Version change (0x3) Version Change Sensor. Please refer to section 4.2.4
(5) IPMB Physical (0x4) Physical IPMB Sensor. Please refer to section 4.2.2
(6) BMC Watchdog (0x5) Watchdog Timer Sensor. Please refer to section 4.2.3
(7) +1.5V DDR-CPU (0x6) Voltage Sensor. Please refer to section 4.2.5
Upper Non-Recoverable Threshold = 1.65 Volts
Upper Critical Threshold = 1.62 Volts
Upper Non-Critical Threshold = 1.59 Volts
Lower Non-Critical Threshold = 1.296 Volts
Lower Critical Threshold = 1.242 Volts
Lower Non-Recoverable Threshold = 1.215 Volts
(8) +1.8V CPU0 (0x7) Voltage Sensor. Please refer to section 4.2.5
Upper Non-Recoverable Threshold = 1.98 Volts
Upper Critical Threshold = 1.944 Volts
Upper Non-Critical Threshold = 1.908 Volts
Lower Non-Critical Threshold = 1.692 Volts
Lower Critical Threshold = 1.656 Volts
Lower Non-Recoverable Threshold = 1.62 Volts
(9) +1.5V DDR-CPU1 (0x8) Voltage Sensor. Please refer to section 4.2.5
Upper Non-Recoverable Threshold = 1.65 Volts