Etwork, Tack, 10 network stack – ADLINK aTCA-6200A User Manual
Page 64: Terminal type, Bits per second, Flow control, Data bits, Parity, Stop bits
64
Terminal Type
VT-UTF8 is the preferred terminal type for out-of-band management. The next best choice is
VT100+ and then VT100.
Bits per second
Select the bits per second that you want serial port to use for console redirection.
Flow Control
Set this option to select Flow control for console redirection.
Data Bits
This option allows to select the data bits you want the serial port to use for console
redirection.
Parity
Set this option to select Parity for console redirection.
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The
standard setting is 1 stop bit. Communication with slow devices may requires more than 1
stop bit.
6.3.10
Network Stack
You can use this screen to specify options for the Network Stack settings.
The screen is shown as below.