ADLINK aTCA-6200A - Manual (Page 67)

67
After select the Ethernet port, you can set the iSCSI and other parameters. The screen is
shown as below.
iSCSI Attempt Name
You can define the attempt name by this option.
iSCSI Mode
You can use this option to enable or disable iSCSI function for the corresponding port.
Internet Protocol
You can choose IPv4 or IPv6 protocol for the corresponding port.
Connection Retry Count
You can use this option to set retry number from 0 to 16, 0 means no retry.
Connection Establishment Time Out
You can use this option to set timeout value in milliseconds, the minimum value is 100
milliseconds and the maximum value is 20 seconds.