ADLINK aTCA-6200A - Manual (Page 35)

35
Sensor Type Sensor
Type
Code Sensor
Specific
Offset Event
3h = OS Load
4h = SMS/OS
5h = OEM
Fh = unspecified
all other = reserved
4.2.4 Version Change Sensor
Sensor Type Sensor
Type
Code Sensor
Specific
Offset Event
Version
Change 2Bh 00h
01h
02h
03h
04h
05h
06h
07h
00h Hardware change detected with associated Entity.
Informational. This offset does not imply whether the
hardware change was successful or not. Only that a change
occurred.
01h Firmware or software change detected with
associated Entity.Informational. Success or failure not
implied.
02h Hardware incompatibility detected with associated
Entity.
03h Firmware or software incompatibility detected with
associated Entity.
04h Entity is of an invalid or unsupported hardware
version.
05h Entity contains an invalid or unsupported firmware or
software version.
06h Hardware Change detected with associated Entity was
successful. (deassertion event means unsuccessful’).
07h Software or F/W Change detected with associated
Entity was successful. (deassertion event means
‘unsuccessful’)
Event data 2 can be used for additional event information
on the type of version change, with the following
definition:
Event Data 2
7:0 Version change type
00h unspecified
01h management controller device ID (change in one
or more fields from ‘Get Device ID’)
02h management controller firmware revision
03h management controller device revision
04h management controller manufacturer ID
05h management controller IPMI version
06h management controller auxiliary firmware ID
07h management controller firmware boot block
08h other management controller firmware