ADLINK aTCA-6200A - Manual (Page 83)

83
6.8 Save & Exit Setup Screen
Select Save & Exit tab from setup utility to enter Save & Exit BIOS setup screen. You can
select an item by highlighting it using the <Arrow> keys. The Save & Exit BIOS setup screen
is shown below.
Save Changes and Exit
When you have completed the system configuration changes, select this option to leave
setup utility and reboot the computer to let new system configuration parameters take
effect. Select this item then press <Enter>. The prompt message will pop up and wait for
use’s confirmation.
Save Changes and Exit?
[OK] [Cancel]
Select OK then press <Enter> to save changes and exit. It will continue the boot up process if
there is no need to reset the system.
Discard Changes and Exit
Select this option to quit setup without making any permanent changes to the system
configuration. When selecting this item and then press <Enter>. The below message will be
shown up and wait for the confirmation.
Discard Changes and Exit?
[OK] [Cancel]
Select OK and press <Enter> to discard changes and exit. It will keep booting the system to
OS.