ADLINK aTCA-6200A - Manual (Page 87)

87
7.4 Establish SOL Connection
Execute the following command from your remote client to establish the SOL Connection
Command:
ipmitool -I lanplus -H <Target IPMC IP > -C < Cipher Suite Id > -U <User Name> -P
<Passsword> sol activate
Note: Please refer to the following table for the Cipher Suite Id
ID
Characteristic
s
Cipher Suite
Authentication
Algorithm
Integrity
Algorithm(s)
Confidentiality
Algorithm(s)
0
“straight
password"
00h, 00h, 00h RAKP-none None None
1 S 01h, 00h, 00h None None
2 S, A 01h, 01h, 00h None
3 S, A, E 01h, 01h, 01h AES-CBC-128
4 S, A, E 01h, 01h, 02h xRC4-128
5 S, A, E 01h, 01h, 03h
RAKP-HMAC-SHA1
HMAC-SHA1-96
xRC4-40
6 S 02h, 00h, 00h None None
7 S, A 02h, 02h, 00h None
8 S, A, E 02h, 02h, 01h AES-CBC-128
9 S, A, E 02h, 02h, 02h xRC4-128
10 S, A, E 02h, 02h, 03h
HMAC-MD5-128
xRC4-40
11 S, A 02h, 03h, 00h None
12 S, A, E 02h, 03h, 01h AES-CBC-128
13 S, A, E 02h, 03h, 02h xRC4-128
14 S, A, E 02h, 03h, 03h
RAKP-HMAC-MD5
MD5-128
xRC4-40
80h-BFh OEM specified OEM specified OEM specified OEM specified OEM specified
C0h-FFh reserved - - - -
The default value of aTCA-6200 SOL parameters are listed in the table below
Parameter Default Value
Channel 1 IP Address 192.168.100.100
Channel 2 IP Address 172.17.100.100
User ID 2
User Name adlinkuser
Password adlinkuser
Below are 2 samples to establish the SOL session via channel 1 with default user name and password:
Establish a non-nncrypted RMCP+ SOL session
./ipmitool -I lanplus -H 172.17.172.134 -C 0 -U "adlinkuser" -P "adlinkuser" sol activate
Establish an encrypted RMCP+ SOL session
./ipmitool -I lanplus -H 172.17.172.134 -C 3 -k gkey -U "adlinkuser" -P "adlinkuser" sol
activate
For more detailed IPMI commands, please visit the following URL: http://ipmitool.sourceforge.net.