ADLINK cPCI-6210 - Manual (Page 21)

Specifications 7
cPCI-6210
2 Specifications
2.1 cPCI-6210 Specifications
CompactPCI
Standard
PICMG® 2.0 CompactPCI® Rev. 3.0
PICMG® 2.1 Hot Swap Specification Rev.2.0
PICMG® 2.9 System Management Bus Rev. 1.0
PICMG® 2.16 Packet Switching Backplane Rev.1.0
Mechanical
Standard 6U CompactPCI®
Board size: 233.23 mm x 160mm
cPCI-6210: Single slot (4HP, 20.32mm) width with single slot
height heatsink
cPCI-6210D: Dual slot (8HP, 40.64mm) width with dual slot
height heatsink
CompactPCI® connectors J1, J2, J3 and J5
Processor
2nd Generation Intel® Core™ processors in FCPGA988
socket with passive heatsink
• Core™ i7-2710QE, 2.1 GHz, 6MB LLC cache, TDP 45W
• Core™ i7-2515E, 2.5 GHz, 3MB LLC cache, TDP 35W
• Celeron® B810, 1.6 GHz, 2MB LLC cache, TDP 35W
Chipset Intel® QM67 Platform Controller Hub (PCH)
Memory
Dual channel DDR3-1066/1333/1600 memory
Two SO-DIMM sockets
Up to 16GB (dependent on availability of memory modules)
CompactPCI Bus
PCI 64-bit/ 66MHz; 3.3V, 5V universal V(I/O)
Supports operation in system slot as master or in peripheral
slot as standalone blade without connectivity to CompactPCI
bus (Satellite mode)
PMC/XMC
One 32-bit/66MHz PMC site or PCIe x8 XMC site provided by
DB-6210L2 riser card (8HP version only)
Graphics
Integrated in Intel® processor
One DVI-I port on front panel (digital and analog signals),
RGB signal switchable to J3; 2nd DVI port routed to J5
One Dual-mode DisplayPort on front panel and can be
converted to DVI/HDMI/VGA via adapter cables, supports
resolutions up to 2560x1600 @60Hz
Analog support up to QXGA 2048x1536 @75Hz, 32-bit
Dual independent display support