ADLINK cPCI-6210 - Manual (Page 86)

72 Utilities
7.2 Using the Trusted Platform Module
This section describes the operation of the cPCI-6210’s Trusted
Platform Module (TPM).
Enabling TPM in BIOS
The TPM is set to "Disabled" by default. Users wishing to use the
TPM must first enable it in BIOS as follows:
1. Under the "Advanced" section in BIOS, choose "Trusted
Computing".
2. Set "TPM Support" to Enabled.
NOTE: NOTE:
TPM is not supported by default. If you require TPM for your
application, please contact your sales representative to order
a model that supports TPM.