ADLINK cPCI-6210 - Manual (Page 71)

Getting Started 57
cPCI-6210
2. Secure the SATA drive onto the bracket with the four
screws provided in the package. This unit is now
referred to as the “drive assembly”.
3. Locate the board-to-board SATA connector (CN12) on
the cPCI-6210 as indicated below.
NOTE: NOTE:
To install the drive assembly on the cPCI-6210D, the
DB-6210L2 must first be removed as described in Step 1 of
“Installing a PMC/XMC Module” on page 60