ADLINK cExpress-HL - Manual (Page 53)

cExpress-HL Page 53
7.3.3 Graphics
Feature Options Description
Graphics Info only
IGFX VBIOS Version Info only Display VBIOS Version.
IGfx Frequency Info only Display IGfx Frequency.
Graphics Turbo IMON Current Number entry field Graphics turbo IMON current values supported (14-31).
Primary Display Auto
IGFX
PCIE Select which of IGFX/PCI Graphics device should be Primary
Display Or select SG for Switchable Gfx.
Primary PCIE Auto
PCIE1
PCIE2
PCIE3
PCIE4
PCIE5
PCIE6
PCIE7 Select PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6/PCIE7
Graphics device should be Primary PCIE.
Internal Graphics Auto
Disable
Enable Keep IGD enabled based on the setup options.
Aperture Size 128MB
256MB
512MB Select the aperture size
DVMT Pre-Allocated 32M Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size
used by the Internal Graphics Device.
DVMT Total Gfx Mem 256MB Select DVMT5.0 Total Graphic Memory size used by the
Internal Graphics Device.
Gfx Low Power Mode Enabled
Disabled This option is applicable for SFF only.
LVDS Backlight Mode BMC Mode
GTT Mode Select LVDS backlight control function.
GTT LVDS Backlight Control 0%
20%
40%
60%
80%
100% Actual backlight value in percent of the maximum setting.
DDI function choose Display Port
HDMI Choose DisplayPort, HDMI or LVDS.
Primary IGFX Boot Display VBIOS Default
EFP
LFP
EFP2 Select the Video Device which will be activated during POS.
LCD Panel Type VBIOS Default
640X480
800X600
1024X768 Select LCD panel used by Internal Graphics Device by selecting
the appropriate setup item.