ADLINK cExpress-HL - Manual (Page 57)

cExpress-HL Page 57
7.3.5.1 USB > Chipset USB Configuration
Feature Options Description
USB Configuration Info only
USB Precondition Disable
Enable Precondition work on USB host controller and root ports for
faster enumeration.
XHCI Mode Enabled
Disabled
Auto
Smart Auto Mode of operation of xHCI controller.
XHCI Idle L1 Enabled
Disabled Enable or disable XHCI Idle L1.\n XhciIdleL1 can be set to
disable for LPT-LP Ax stepping to workaround USB3 hot plug
will fail after 1 hot plug removal.
BTCG Disable
Enable
Enable / Disable trunk clock gating.
USB Ports Per-Port Disable Control Disable
Enable Control each of the USB ports (0~13) disabling.
7.3.6 Network
Feature Options Description
Network Info only
Network Stack Enabled
Disabled Enable/Disable UEFI network stack.
LAN Controller Enabled
Disabled Enable/Disable LAN controller.
Wake on LAN Disabled
Enabled If Enabled: LAN_PWR is always on; If Disabled: LAN_PWR is
off after entering Suspend mode.
AMT Configuration Info only
Intel AMT Enabled
Disabled Enable/Disable Intel (R) Active Management Technology BIOS
Extension.
BIOS Hotkey Pressed Enabled
Disabled Enable/Disable BIOS hotkey press.
MEBx Selection Screen Enabled
Disabled Enable/Disable MEBx selection screen.
Hide Un-Configure ME Confirmation Enabled
Disabled Hide Un-Configure ME without password Confirmation Prompt.
MEBx Debug Message Output Enabled
Disabled Enable MEBx debug message output.
Un-Configure ME Enabled
Disabled Un-Configure ME without password.
Amt Wait Timer 0 Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
Disable ME Enabled
Disabled Set ME to Soft Temporary Disabled.
ASF Enabled
Disabled Enable/Disable Alert Specification Format.
Activate Remote Assistance Process Enabled
Disabled Trigger CIRA boot.