ADLINK cExpress-HL - Manual (Page 64)

Page 64 cExpress-HL
Feature Options Description
Active Cooling Trip Point Disabled
40 C
50 C
60 C
70 C
BMC Default Active Cooling Trip Point.
Passive Trip Point Disabled
90 C
80 C This value controls the temperature of the ACPI Passive Trip
Point - the point at which the OS will begin throtting the
processor.
Passive TC1 Value 1 This value sets the TC1 value for the ACPI Passive Cooling
Formula. Range 1 - 16
Passive TC2 Value 5 This value value sets the TC2 value for the ACPI Passive
Cooling Formula. Range 1 - 16
Passive TSP Value 10 This item sets the TSP value for the ACPI Passive Cooling
Formula. It represents in tenths of a second how often the OS
will read the temperature when passive cooling is enabled.
Range 2 - 32
Watchdog ACPI Even Shutdown Disable
Enable Enable / Disable Watchdog ACPI Even Shutdown.
7.3.13 Miscellaneous
Feature Options Description
Miscellaneous Info only
High Precision Timer Enabled
Disabled Enable or disable the High Precision Event Timer.
Security Info only
BIOS Security Configuration Submenu
Trusted Computing Submenu
Intel TXT(LT) Configuration Disable
Enable Enables or Disables Intel(R) TXT (LT) support.
7.3.13.1 Miscellaneous > BIOS Security Configuration
Feature Options Description
BIOS Security Configuration Info only
Global SMI Lock Enabled
Disabled Enable or disable SMI lock.
BIOS Lock Disable
Enable Enable or disable BIOS lock enble (BLE) bit.
GPIO Lock Disable
Enable Enable or disable GPIO lockdown.
BIOS interface Lock Disable
Enable Enable or disable BIOS interface lockdown.
RTC RAM Lock Disable
Enable Enable or disable bytes 38h-3Fh in the upper and lower 128-
byte bank of RTC RAM lockdown.