ADLINK cExpress-HL - Manual (Page 58)

Page 58 cExpress-HL
Feature Options Description
USB Configure Enabled
Disabled Enable/Disable USB Configure function.
PET Progress Enabled
Disabled User can Enable/Disable PET Events progress to recieve PET
events or not.
AMT CIRA Timeout 0 OEM defined timeout for MPS connection to be established. 0 -
use the default timeout value of 60 seconds. 255 - MEBX waits
until the connection succeeds.
Watchdog Enabled
Disabled
Enable/Disable WatchDog Timer.
OS Timer Set OS watchdog timer.
BIOS Timer Set BIOS watchdog timer.
7.3.7 PCI and PCIe
Feature Options Description
PCI and PCIe Info only
PCI Common Settings Info only
PCI Latency 32 PCI Bus Clocks
64 PCI Bus Clocks
96 PCI Bus Clocks
128 PCI Bus Clocks
160 PCI Bus Clocks
192 PCI Bus Clocks
224 PCI Bus Clocks
248 PCI Bus Clocks Value to be programmed into PCI latency timer register.
VGA Palette Snoop Disabled
Enabled Enables or Disables VGA palette registers snooping.
PERR# Generation Disabled
Enabled Enable or Disable the PCI Express port 1 in the chipset.
SERR# Generation Disabled
Enabled Enables or Disables PCI Device to generate SERR#.
PCI Express Settings Info only
Relaxed Ordering Disabled
Enabled Enables or Disables PCI Express device relaxed ordering.
Extended Tag Disabled
Enabled If Enabled, allows device to use 8-bit tag field as a requester.
No Snoop Disabled
Enabled Enables or Disables PCI Express device No Snoop option.
Maximum Payload Auto
128 Bytes
256 Bytes
512 Bytes
1024 Bytes
2048 Bytes
4096 Bytes Set maximum payload of PCI Express device or allow system
BIOS to select the value.
Maximum Read Request Auto
128 Bytes
256 Bytes
512 Bytes
1024 Bytes
2048 Bytes Set maximum read request size of PCI Express device or
allow system BIOS to select the value.