ADLINK cExpress-HL - Manual (Page 54)

Page 54 cExpress-HL
Feature Options Description
1280X1024
1400X1050
1600X1200
1366X768
1680X1050
1920X1200
1440X900
1600X900
1024X768 LVDS2
1280X800
1920X1080
2048X1536
Active LFP No LVDS
Edp Port-A Select the Active LFP Configuration.
Panel Color Depth 18 Bit
24 Bit Select the LFP Panel Color Depth
Panel Scaling Auto
Off
Force Scaling Select the LCD panel scaling option used by the Internal
Graphics Device.
GT – Power Management Control Info only
GT Info Info only Display GT info of Intel Graphics.
RC6 (Render Standby) Enabled
Disabled Check to enable render standby support.
GT OverClocking Support Enabled
Disabled Enable / Disable GT OverClocking Support.
GT OverClocking Frequency XX Overclocked RP0 Frequency (MLC Clk) in multiples of 50 MHz
GT OverClocking Voltage XX Extra voltage needed above the original RP0 voltage - The unit
is 1/256 volt
7.3.4 SATA
Feature Options Description
SATA Info only
SATA Controller(s) Enabled
Disabled Enable/Disable Serial ATA.
SATA Mode Selection AHCI
RAID Select AHCI/RAID
SATA Test Mode Enabled
Disabled Test Mode enable/disable
Aggressive LPM Support Enabled
Disabled Enable PCH to aggressively enter link power state.
SATA Controller Speed Default
Gen1
Gen2
Gen3 SATA speed support Gen1 or Gen2.
Intel ® Rapid Start Technology Submenu