ADLINK cExpress-HL - Manual (Page 55)

cExpress-HL Page 55
Feature Options Description
SATA Port Configuration Submenu
Software Feature Mask Configuration Info only
RAID0 Enabled
Disabled Enable / Disable RAID0 feature.
RAID1 Enabled
Disabled Enable / Disable RAID1 feature.
RAID10 Enabled
Disabled Enable / Disable RAID10 feature.
RAID5 Enabled
Disabled Enable / Disable RAID5 feature.
Intel Rapid Recovery Technology Enabled
Disabled Enable / Disable Intel Rapid Recovery Technology.
OROM UI and BANNER Enabled
Disabled If enabled, then the OROM UI is shown. Otherwise, no OROM
banner or information will be displayed if all disks and RAID
volumes are Normal.
HDD Unlock Enabled
Disabled If enabled, indicates that the HDD password unlock in the OS is
enabled.
LED Locate Enabled
Disabled If enabled, indicates that the LED/SGPIO hardware is attached
and ping to locate feature is enabled on the OS.
IRRT Only on ESATA Enabled
Disabled If enabled, then only IRRT volumes can span internal and
eSATA drives. If disabled, then any RAID volume can span
internal and eSATA drives.
Smart Response Technology Enabled
Disabled Enable / Disable Smart Response Technology.
OROM UI Delay 2 Seconds
4 Seconds
6 Seconds
8 Seconds If enabled, indicates the delay of the OROM UI Splash Screen
in a normal status.
7.3.4.1 SATA > Intel® Rapid Start Technology
Feature Options Description
Intel (R) Rapid Start Disabled
Enabled Enable / Disable Intel (R) Rapid Start.
7.3.4.2 SATA > SATA Port Configuration
Feature Options Description
SATA Port Configuration Info only
Port X Disabled
Enabled Enable / Disable SATA Port.
HotPlug Enabled
Disabled
Enable/Disable SATA port X hotplug.
Mechanical Presence Disabled
Enabled Controls reporting if this port has an Mechanical Presence
Switch.\n\nNote: Requires hardware support.
External SATA Disabled
Enabled External SATA Support.