Dream Property DM500 HD - Manual (Page 11)

-11-
Numeric-Keypad
Arrow-Left-Button
Mute-Button
Volume +/- Buttons
INFO-Button
Navigation-Buttons
Arrow-Right-Button
EXIT-Button
Bouquet +/- Buttons
Enter a service number to directly access the option by using the Numeric Keypad . The service numbers are
on the left side of the service list.
The Numeric Keypad can also be used to enter the teletext page number when you are in TV-Control-Mode
and if your TV is teletext capable. The TV station has to submit teletext information; otherwise this feature
cannot be used.
The Arrow-Left and Arrow-Right-Button enable you to jump back and forth between the last 20 channels
you have watched. If you have selected a sub service (see chapter 4.6) you can use these buttons to switch
to the next sub service. Additionally these buttons can be used to delete characters during text input.
Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on the TV screen. Pres-
sing it again or pressing one of the Volume +/- Buttons brings back the audio.
The Mute-Button deletes a character during text input.
You can leave all menus and service lists by pressing the EXIT-Button .
The Volume +/- Buttons control the volume of the audio. Pressing + will make turn it up and pressing - will
turn it down.
Pressing the Bouquet +/- Buttons will jump back and forth between the bouquets.
If no OSD menu is visible on the screen and you are in TV or RADIO-Mode, pressing the INFO-Button will
reveal the EPG information of the chose channel if it is available.
In general the menus are controlled using the Navigation-Buttons on your remote control.
To get into a submenu you have to press the OK-Button .