Dream Property DM500 HD - Manual (Page 47)

-47-
Recordings always have priority:
If this option is set to “Yes” your Dreambox will automatically switch to the service which is supposed to be
recorded incase there is a conflict with an existing timer.
If you set this option to “No” you will be asked if you want to switch to the service which is supposed to be
recorded.
Show positioner movement:
If you own a satellite dish with a positioner you can see a flashing symbol of a satellite dish on your screen if
you set this option to “yes”.
Enable multi bouquets:
Set this option to “Yes” if you want to use multiple bouquets.
Change bouquets in quickzap:
If this option is set to “Yes” you will automatically be taken to the next bouquet while changing channels
once you have reached the end of one bouquet.
Alternative radio mode:
Set this option to “Yes” if you want the handling in the Radio mode to be the same as in the TV mode.
Action on long powerbutton press:
Set your desired option what is supposed to happen if you push the Power-Button for a few seconds. The
possible options are “show shutdown menu” and “immediate shutdown”.
10.3 Setting the time zone
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option “Setup” and press the OK-Button to select.
1. Navigate to the option “System” and press the OK-Button.
• The “System” menu will open up.
2. Navigate to the option “Timezone…” and press the OK-Button.
The “Time zone” menu will open up.
Use the left/right-Buttons to select the desired time zone.
Press the green Options-Button to save the setting or the red
Options-Button to discard them.