Dream Property DM500 HD - Manual (Page 46)

-46-
10.2 Customize
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option “Setup” and press the OK-Button to select.
1. Navigate to the option “System” and press the OK-Button.
• The “System” menu will open up.
2. Navigate to the option “Customize…” and press the OK-Button.
Setup modes:
There are three different user modes: Simple, Intermediate and Expert.
This gives you the possibility to set the level of options to your needs. Intermediate is the default setting.
We will not explain the expert mode in detail in this manual.
Simple mode:
Margin before record (minutes):
Set the desired forerun in minutes for a recording.
Margin after record:
Set the desired lag in minutes for a recording.
Show blinking clock in display during recording:
Select wether you want the time in the OLED-Display to blink during a recording or not.
Infobar timeout:
Set the desired time after which you want the Infobar to disappear. You can choose between one and ten se-
conds or “no timeout”.
Intermediate mode:
These settings supplement the settings in simple mode.