Service searching 11.1 dvb-s2 tuner configuration, 1 single satellite – direct connection – Dream Property DM500 HD User Manual
Page 53
-53-
11. Service searching
11.1 DVB-S2 Tuner configuration
If no OSD menu is visible on your screen, press the
Menu-Button
to open the main OSD menu. Navigate to
the option “Setup” and press the
OK-Button
to select.
1. Navigate to the option “Service searching” and press the OK-Button.
• The “Service searching” menu will open up.
2. Navigate to the option “Tuner configuration” and press the OK-Button.
• The “Choose tuner“ menu will open up.
3. Use the Navigation-Buttons up and down to select the DVB-S2 tuner and press the OK-Button.
11.1.1 Single satellite – direct connection
Use this type of configuration if you want to receive a single satellite with a Single Universal LNB. The coax
cable is directly connected from you Dreambox to the LNB. Please read the section 11.1 DVB-S2 configurati-
on to learn how to get into this menu.
The “Reception settings” menu will open up.
Use the
up/down-Buttons
to navigate to the “Mode” option and use
the
left/right-Buttons
to select “Single”.
Navigate to the option “Satellite”.
Use to the
Navigation-Buttons
left and right to select the desired
satellite and press the
OK-Button
.
You are taken back to the “Choose tuner“ menu.
If you have trouble with “Tune failed“ messages please set the
“Send DiSEqC only on sattelite change“ to “yes“.