Dream Property DM500 HD - Manual (Page 64)

-64-
15.1 Programming the remote control
• Press the TV-Mode-Button once.
• Press the SHIFT/Setup-Button for 3 seconds, the TV-Mode-Button will flash twice.
• Use the Numeric-Keypad to enter the three digit device code into the remote control.
The TV-Mode-Button will flash once for every digit you enter. Once you have entered all
three digit the TV-Mode-Button will flash twice.
• The remote control exits the programming mode automatically.
• If no code is entered within 10 seconds the remote control will exit the programming
mode automatically.
16. Technical data
• 400 MHz MIPS Prozessor
• Linux operating system
•
MPEG2 / H.264 hardware decoding (DVB compli-
ant)
• DVB-S2 Tuner
• 1x Smartcard-Reader (Dreamcrypt)
• HDMI
• 1x Scart-Output (RGB, FBAS or S-Video)
• 1 x Mini-USB Service Port
• S/P-DIF optical output
• 10/100 Mbit Ethernet Port
• analog modem
• 256 MByte RAM
• 64 MByte Flash
• external eSATA Connector
• unlimited channellist for TV/Radio
• channel change in less than one second
• automatic service seraching
• supports bouquet lists
• EPG support (Electronic Program Guide)
• integrated teletext
• supports DiSEqC
TM 1.0/1.1/1.2 and USALS
• OSD in many languages
• external 12V power supply
Additional info:
DVB/S2-Tuner:
Frequency range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbolrate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 … 31 Mbaud/s (8PSK) , 10 … 30
Mbaud/s (QPSK)
Video decoder:
Video Compression MPEG-2 and MPEG-1 compliant, H.264
Picture format 4:3, 16:9
Letterbox for 4:3 TV sets
Audio decoder:
Audio compression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Analog out:
Outputlevel L/R 0,5 Vss at 600 Ohm
THD > 60 dB (1kHz)
Cross-talk < -65 dB