EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 182)

SCPI Command Reference
174 IQS-1600
Product-Specific Commands—Description
:SENSe[1..n]:FREQuency:NCONtinuous
Description This command sets the single acquisition rate in
Hz.
Syntax :SENSe[1..n]:FREQuency:NCONtinuous<wsp><
SingleRate[<wsp>HZ]>
Parameter(s) SingleRate:
The program data syntax for <SingleRate> is
defined as a <DECIMAL NUMERIC PROGRAM
DATA> element followed by an optional
<SUFFIX PROGRAM DATA> element. The
allowed <SUFFIX PROGRAM DATA> element is
HZ.
The <numeric_value> parameter is the Single
acquisition rate.
Example(s) SENS:FREQ:NCON 512
Notes This command is not executed if a data
acquisition is in progress. In that case, the
"acquisition in progress" message will be
returned.
See Also SENSe:FREQuency:CONTinuous
SENSe:FREQuency:CONTinuous?
SENSe:FREQuency:CONTinuous:CATalog?
SENSe:FREQuency:NCONtinuous?
SENSe:FREQuency:NCONtinuous:CATalog?