EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 215)

SCPI Command Reference
High Speed Power Meter 207
Product-Specific Commands—Description
:TRACe[1..n]:POINts
Description This command sets the number of points to store
for all traces. The maximum number of points
that can be acquired depends on the number of
channels, since the physical memory is equally
divided according to the number of channels.
On a 4-channel powermeter, the maximum is
16383 points.
On a 2-channel powermeter, the maximum is
32767 points.
On a 1-channel powermeter, the maximum is
65534 points.
The sufix [1..n], appearing after the keyword
"TRACe", is not used.
Syntax :TRACe[1..n]:POINts<wsp>TRC1|TRC2|TRC3|T
RC4[,<NumberPoint>]
Parameter(s)
³
Trace:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
TRC1|TRC2|TRC3|TRC4.