EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 222)

SCPI Command Reference
214 IQS-1600
Product-Specific Commands—Description
:TRIGger[1..n]:POSition:CATalog?
Description This query returns a list of available values for the
trigger position. These values determine the
percentage of points that will be acquired in
Single acquisition mode before the trigger is met.
Syntax :TRIGger[1..n]:POSition:CATalog?
Parameter(s) None
Response Syntax <TriggerList>
Response(s) TriggerList:
The response data syntax for <TriggerList> is
defined as a <DEFINITE LENGTH ARBITRARY
BLOCK RESPONSE DATA> element.
The response corresponds to the list of available
trigger positions.
Example(s) TRIG:POS:CAT?
See Also TRIGger[:SEQuence]:LEVel
TRIGger:POSition
TRIGger[:SEQuence]:STATe
TRIGger[:SEQuence]:SOURce
TRIGger[:SEQuence]:SLOPe