EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 213)

SCPI Command Reference
High Speed Power Meter 205
Product-Specific Commands—Description
:TRACe[1..n]:MIN?
Description This query returns minimum value in the trace.
Syntax :TRACe[1..n]:MIN?<wsp>TRC1|TRC2|TRC3|TR
C4
Parameter(s) Trace:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
TRC1|TRC2|TRC3|TRC4.
This parameter allows to select the trace to use.
Each trace corresponds to a channel:
TRC1 - acquisition made on channel 1
TRC2 - acquisition made on the channel 2
TRC3 - acquisition made on the channel 3
TRC4 - acquisition made on the channel 4
Response Syntax <PointMin>
Response(s) PointMin:
The response data syntax for <PointMin> is
defined as a <NR3 NUMERIC RESPONSE DATA>
element.
The response corresponds to the smallest value
in the specified trace.
The minimum trace point is returned in the same
unit used to perform the acquisition.