EXFO IQS-1600 High-Speed Power Meter for IQS-500/600 - Manual (Page 226)

SCPI Command Reference
218 IQS-1600
Product-Specific Commands—Description
:TRIGger[1..n][:SEQuence]:SLOPe?
Description This query returns the rising or falling edge status
of the trigger condition. It defines whether
positive or negative transitions will trigger the
acquisition.
Syntax :TRIGger[1..n][:SEQuence]:SLOPe?
Parameter(s) None
Response Syntax <Slope>
Response(s) Slope:
The response data syntax for <Slope> is defined
as a <CHARACTER RESPONSE DATA> element.
The edge used for trigger acquisition, where:
0 or NEGative -Falling edge trigger.
1 or POSitive -Rising edge trigger.
Example(s) TRIG:SEQ:SLOP?
See Also TRIGger{:SEQuence]:SLOPe
TRIGger[:SEQuence]:LEVel
TRIGger:POSition
TRIGger:POSition:CATalog?
TRIGger[:SEQuence]:STATe
TRIGger[:SEQuence]:SOURce