Golden Blount Infrared Elite - Manual (Page 10)

10
Removing the gas cylinder:
1. Turn handwheel on cylinder valve clockwise until it
stops.
2. Remove cylinder from grill cart.
3. Loosen coupling nut by turning counter-clockwise.
NATURAL GAS INSTALLATION:
CAUTION: Gas piping to your grill must be in accordance
with local codes. In the absence of local codes, use the
National Fuel Gas Code, ANSI Z223.1 (latest edition)
CAUTION: The gas supply must be turned off at the grill
when this appliance is not in use.
When ordered for natural gas, the “Infrared Elite” comes
adjusted for natural gas. A qualified gas installer should
CONNECTING LP TANK CONT.
4. Inspect regulator fittings and tank valve fitting and clean
if necessary. Replace damaged parts prior to use.
5. Insert regulator nipple into the cylinder valve outlet.
Tighten the coupling nut by hand, do not cross thread
connection. See figure 5.
Figure 4. Figure 5.