Golden Blount Infrared Elite - Manual (Page 12)

12
Operation:
WARNING!
Before lighting your grill be sure to read this section carefully.
WHEN LIGHTING YOUR GRILL ALWAYS KEEP YOUR FACE
AND BODY AS FAR AWAY FROM THE GRILL AS POSSIBLE
Lighting the grill burners:
1. Make sure all knobs are in the OFF position.
2. Open hood.
3. Turn on gas supply.
4. Push and turn right pilot valve knob to “pilot” position.
See figure 6.
5. Rotate igniter knob clockwise several times. You will
hear a snapping sound, indicating that a spark is being
delivered to the pilot. You may need to rotate knob
several times before the pilot lights. Check to make
sure pilot is lit. See figure 7.
6. If the pilot does not light, turn the knob to the OFF
position and wait 5 minutes before repeating steps 4
and 5.
7. Rotate burner control knob(s) to “High” position and
burners will ignite. Leave burners at high position to
pre-heat grill to desired searing temperature.
8. Adjust burner control knob(s) to desired cooking levels.
9. To turn off grill, push in and turn burner control knobs
and the pilot valve knob to the “Off” position.
10. NOTE: Elite I model has one burner only.
Figure 6. Figure 7.
Ignitor
Left burner
control valve
Right burner
control valve
Pilot
valve
1” Pilot
Flame
Location