Dukane Ultrasonic Generator 403-575-00 - Manual (Page 22)

Placement in a Seismic Region
If the iQ generator is to be used in an active seismic region,
secure the unit by rack-mounting it or by securing the unit
to a benchtop.
Rack- Mounting
Install the four brackets from Dukane's rack-mount kit to
the generator. See Table 3-I, and Figure 3- 4 (showing a
low profile unit) below.
Mount the generator to a 19-inch equipment rack.
Figure 3-4 Rack Mounting iQ Generator
System Type Dukane Part Number
High Profile 147- 4721
Low Profile 147- 4720
Table 3- I Rack Mount Bracket Part Numbers
3.82
[97.0]
3.44
[87.4]
3.25
[82.6]
12.57
[319.3]
12.99
[330.0]
ALLOW 5"
BOTH
SIDES
FOR
COOLING
ALLOW 5"
BOTH
SIDES
FOR
COOLING
ALLOW 3" IN BACK FOR CABLES
IN
[mm]
0.25 X 0.50 SLOT
(2 PLCS)
18.76
[476.5]
18.16
[461.2]
17.16
[435.9]
OPTIONAL RACK
MOUNT BRACKETS
147-4720
11.37
[288.8]
0.81
[20.6]
0.12
[3.0]
Continued from previous page
Continued
Page 16
iQ Series Ultrasonic Generator/Power Supply ES User’s Manual
Dukane Manual Part No. 403-575-00