Dukane Ultrasonic Generator 403-575-00 - Manual (Page 23)

Benchtop Mounting
If you choose to mount the generator on a benchtop follow
these instructions:
1) Install the four (4) optional hold down
brackets. See Figure 3- 5 below.
2) Secure the slot side of each bracket to the
generator's sheet metal cover.
3) Secure the hole side of each bracket to the
bench itself.
Figure 3-5 Securing iQ Generator to Benchtop
12.54
[318.52]
0.280 HOLE
18.04
[458.22]
18.84
[478.47]
OPTIONAL HOLD
DOWN BRACKETS
OPTIONAL HOLD DOWN BRACKETS
147-1398
ALLOW 5" BOTH
SIDES
FOR COOLING.
IN
[mm]
ALLOW 3" IN BACK FOR CABLING.
5.50
[139.7]
ALLOW 5" BOTH
SIDES
FOR COOLING.
5.19
[131.83]
17.16
[435.86]
13.20
[335.28]
1.40
[35.6]
1.14
[29.0]
10.00
[254.0]
Continued from previous page
Page 17
Dukane Manual Part No. 403-575-00
Section 3 - Installation