Dukane Ultrasonic Generator 403-575-00 - Manual (Page 48)

Other Control
Functions
Other control functions - such as monitoring the weld-
ing process and controlling the system are accomplished
using the iQ HMI or your computer and Dukane's iQ
Explorer
software.
Stopping the Weld
Cycle
Normal Conditions
The cycle stops when the programmed welding cycle ends
or when the rear panel's Cycle Stop input is activated.
Emergency Conditions
If the generator's front panel power button is lighted, press
the button so that the light goes out.
In addition, you may push the power switch on the
generator's rear panel to the OFF position.
Figure 4-2 iQ Explorer, Numeric Pad
NOTE
iQ Explorer provides a touch screen
numeric pad and a keyboard for easy
parameter entry.
Select c for the keyboard.
Select c for the numeric pad.
Figure 4-2 shows the
numeric pad.
1
A
iQ Explorer Support
Features
Two support features incorporated into your iQ Explorer
software are its virtual numeric pad/keyboard and its help
system.
Numeric Pad and Keyboard
Page 42
iQ Series Ultrasonic Generator/Power Supply ES User’s Manual
Dukane Manual Part No. 403-575-00