Labconco Protector Controlled Atmosphere Glove Box - Manual (Page 39)

Chapter 5: Using Your Glove Box
Product Service 1-800-522-7658 35
Front Panel Description
The front panel includes a large display screen and touchpad keys that are
adjacent to the LCD display. The operation of these keys will be defined by
text on the display screen (LCD). Each key may perform a different operation
depending on the control mode selected.
Rear Panel Description
The rear panel includes the power inlet and circuit breakers, power on/off
switch, the outlet receptacle for plugging in a vacuum pump (the receptacle
varies for 115 volt and 230 volt models), and electrical connection for the
glove box pressure control footswitch. The 4 electric solenoid valves that
provide control of the glove box Main Chamber gas in/gas out, and Transfer
Chamber gas in/gas out are also located on the rear panel. See the separate
mechanical installation instructions for plumbing connections to these valves
in Chapter 3 and Figure 3-4.