Labconco Protector Controlled Atmosphere Glove Box - Manual (Page 59)

Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658 55
21. Drying Train Tubing Kit
Includes the (FEP) tubing and connections required for connecting
typical drying train components such as moisture, oxygen, and other
gases. Fluorinated ethylene-propylene (FEP) tubing has very low
moisture absorption.
Part # Descriptions
5242500 Drying Train Tubing Kit; moisture, solvents and radioisotopes
5242501 Drying Train Tubing Kit; oxygen and moisture only
22. Gas and Vacuum 0.2 Micron Filter (Part #5240100)
Used for removal of particulates in a drying train, vacuum pump
exhaust or inert gas line. 0.25"-0.38" ID tube connection with
additional fittings for attachment to 0.50" ID hose.
23. External Glove Port Covers (Part #5242200)
Cap and clamp attaches to the glove ports to eliminate glove inflation
during purging and filling operations and reduce the cycle time of the
purging/filling process. Sold as a set of two.
24. Interior Glove Port Cover (Part #5060400)
Quickly seals glove box should sudden leak occur due to glove
damage. Stainless steel with molded rubber gasket and spring-loaded
latches with adjustable closure knob.
25. Interior Shelves (Part #5061600)
Provide shelf space across back wall of glove box interior. Three
stainless steel storage shelves are attached to epoxy-coated steel
upright supports. Shelves have adjustable height and measure 30"
wide x 6" deep. Installation hardware and instructions included.
26. Gloves (see Appendix A: Replacement Part numbers for other
glove sizes and material types)
Neoprene gloves are the most resistant to abrasion and tearing. Butyl
gloves provide higher impermeability and improved dexterity.
Hypalon gloves are made with a mixture of neoprene and butyl rubber
to provide an intermediate level of neoprene and butyl features.
27. Left Side Sealed Electrical Plug Kit (see Part #’s below)
Part # Descriptions
5075622 115V single outlet
5075623 230V IEC single outlet
28. Vacuum Line HEPA Filter and Housing
Part # Descriptions
5441400 Housing for HEPA Filter and connections
5441401 HEPA Filter, Round 99.99% efficient on 0.3 micron
5441403 Pressure Relief Bubbler Room Exhaust Kit for HEPA filtration