Labconco Protector Filtered Glove Box User Manual

Page 27

Advertising
background image

Chapter 4: Performance Features and Safety Precautions

Product Service 1-800-522-7658

23

3. Particulate containment <20 nanograms per cubic meter as confirmed by

SafeBridge Consultants, Incorporated.

4. Fast “clean up time.” 0.05 ppm average tracer gas levels or less detected

during perimeter scan testing (surpasses ASHRAE 110 standards) after 5
minute dilution.

5. Airborne particulate cleanliness (measured under positive and negative

pressures per ISO 14644-1 test method) exceeds ISO Class 5 conditions
(equivalent to Class 100) and achieves ISO Class 3 conditions.

6. Factory leak-tested with a mass spectrometer while pressurized with

helium at 1 inch of water gauge. No detectable leaks greater than 1 x 10

-6

ml/sec.

7. Test port for challenging HEPA or ULPA filter integrity.
8. True Bag-In/Bag-Out Filter Disposal System for safe filter removal and

replacement.

9. LCD display provides real time monitoring of volume dilution rates in

cubic feet per minute (CFM), air changes/minute (ACM), and main
chamber pressure (inches of water).

10. Built-in blower with speed control capable of airflow from 15 CFM to 85

CFM.

11. Large viewing area, 36" w x 27.6" high provides maximum visibility.

Viewing window is 3/8" thick, laminated safety glass. Double width
models have double the viewing area.

12. Space-saving inner and outer transfer chamber doors that pivot upward,

are counterbalanced and equipped with quick-latches.

13. Interior right-handed side wall-mounted electrical duplex receptacle with

10 amp maximum (100/115 volt models) or 10 amp maximum (230 volt
models) circuit load.

14. Interior left hand side wall-mounted pass-through plug for on-site

installation of an optional accessory: electrical outlet, RS-232 port,
gas/liquid port, or port for oxygen or moisture monitor.

15. Pair of neoprene gloves, 0.015" thick, 30" long, size 9 ¾. Two pair for

double width models.

16. Switches for light, blower and electrical duplex.
17. Two 8" ID, epoxy-coated aluminum, double-grooved glove ports

mounted 17" apart, with neoprene gaskets. Double width models have
four glove ports.

18. Two 25-watt fluorescent lights. Double width models have four lights.

Advertising