Labconco Protector Filtered Glove Box - Manual (Page 53)

Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658 49
7. Balance Vibration Isolator (Part #5234600)
Isolates building vibration and aids with balance weighing. Includes a
20" x 13" x 2 1/4" marble slab with isolator pads and type 304 stainless
steel top cover to protect the porous marble.
8. Add-A-Valve Kit (Part #5442600 for Transfer Chamber and Part
#5442700 for Main Chamber)
Includes the two valves, tubes, instructions and nuts to supply the
main chamber or the transfer chamber to purge vacuum, fill gas,
connect a drying train, or connect filtration components.
9. Vacuum Aspirator Kit
Includes the valve, hose, canister, and vacuum pump for evacuating
fluids around the work surface.
Part # Descriptions
5241800 Vacuum Aspirator Kit, 115V
5241801 Vacuum Aspirator Kit, 230V
10. Electrical Power Strips
These convenience electrical power strips are available in US and
international versions and plug into the interior receptacle of the
glove box.
Part # Descriptions
5211500 US Power Strip 115V, 4 Position, 10A
5210601 UK Power Strip 250V, 6 Position, 10A
5290401 European Power Strip 250V, 4 Position, 10A
5332601 Australian Power Strip 250V, 6 Position, 10A
11. Electrical 9 Pin Sealed Pass-Through Kit (Part #5075619)
Includes sealed 9 pin (D-subminiature with male pins on one side and
female pins on the other) connector and cord for data transfer to a
typical printer outside the glove box from the balance. Note: Order
the 9 pin installation kit separately which includes all the drill bits and
hole saws for field installation (Part #5241100).
12. Mechanical or Electrical Straight Pass-Through Kit
(Part #5240700)
Provides three ID pass-through ports with sizes of .230/.395,
.230/.530, and .450/.705. Order the installation kit with drill bits
separately (Part #5240800). Useful for sealing cords and plumbing.
13. FilterMate Portable Exhausters and Filters for Secondary
Filtration (see models and filters below)
The FilterMate Portable Exhauster can successfully adsorb low level
organic vapors, formaldehyde, ammonia, and secondary particulates
via another HEPA filter.