Labconco Protector Filtered Glove Box - Manual (Page 57)

Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658 53
31. HEPA and ULPA Filters
Part # Descriptions
5225105 Replacement Standard HEPA Filter, 99.99%
efficient on 0.3 micron particles
5225106 Optional ULPA Filter, 99.999% efficient on 0.3
micron particles
32. Inlet-Outlet Connection Kit – No HEPA (Part #5253400)
The 3.94" OD inlet-outlet connection kit consists of two sealed flange
connections that attach to the inlet and outlet vent holes of the glove
box main chamber when the HEPA filter housings and HEPA filter
are removed. The connection kit enables direct connection of 4.0" ID
hose or ductwork to the glove box.
33. Left Side Door Option (Factory Prepared Only)
Any stainless steel glove box can be factory prepared with a large
sealed left side door for use in conveniently loading large equipment.
With the left side door option, the need to remove the front laminated
safety glass frame is eliminated. The left side door has an opening of
16.5" (419 mm) wide x 23.2" (589 mm) high. Contact Labconco at
time of order for the left side door option.
Figure 7-1
Left Side Door Option