Setup, Installing right and left im thigh skins – Laerdal SimMan 3G Trauma User Manual

Page 28

Advertising
background image

28

SETUP

Installing Right and Left IM Thigh Skins

1 The dorsal side of each IM Thigh Skin is marked by either an “L”

or “R”. This marking should be aligned with the corresponding
“L” or “R” on the upper dorsal thigh of the simulator’s.

2 Apply a liberal amount of baby powder to the inside of the skin

and leg and pull the skin all the way up until it is even with the
top of the leg skin.

3 Fold the skin half way down and carefully insert the Foam IM

Pad underneath the skin. The Foam IM Pad could tear if
mishandled.




4 The Foam IM Pad should sit 1” (2.5 cm) from the top edge of

the leg. Replace the skin.

3.

Advertising