Setup, Tibial io – Laerdal SimMan 3G Trauma User Manual
Page 30
Advertising
![background image](/manuals/738881/30/background.png)
30
SETUP
Tibial IO
1 Attach the Tibial IO bag to the Tibial tube and close off
the pinch clamp.
2 Roll the leg band, to expose the Tibial IO Unit.
3 Remove the IO tape. Then remove the Tibial IO Unit
from the leg.
4 Remove the tube from the Tibial IO Unit.
5 Remove the Tibial IO Pad from the Tibial IO chassis.
6 Before replacing the new Tibial IO, ensure that the nipple
is retracted in the Tibial IO Pad.
7 Fit the new Tibial IO Pad into the chassis.
8 Secure the Tibial IO Pad in place by pressing the rear of
the pad with thumbs until the nipple moves forward and
locks the unit in place.
Advertising