Laerdal SimMan 3G Trauma - Manual (Page 39)

39
MAINTENANCE
Replacing Chest Drain Pleura
The Chest Drain Module’s Pleura Skin should be replaced after
each use.
1 Open the Torso Skin and remove the module from the chest.
2 Remove the old Pleura skin, and replace with a new skin and
replace the module.
Replacing Pneumothorax Bladders
After multiple pneumothorax decompressions,
the bladders may need replacement:
1 Open the Torso Skin to expose the chest
plate. Lift the Chest Plate to reveal the
Pneumothorax Bladders located in slots in the
side of the Chest Plate assembly.
2 Slide out the used Pneumothorax Bladder.
3 Disconnect the tube and discard the old
bladder.
4 Insert the new bladder into the slot.
5 Reconnect the tube to the new bladder.
Cautions
and
W
arnings
Featur
es
Setup
Maintenance
Spar
e Par
ts
Tr
oubleshooting