LINK Systems OmniLink II Press Automation Control - Manual (Page 154)

August 30, 2002 Manual Version 1.0 7.17
Section 7.7.3 Status Information
Status information is available for the individual channel, the individual module, and the entire
Programmable Limit Switch system.
Individual channel status is listed next to the channel description on the Limit Switch screen. Channel
status can be OK or Error.
Additional status information for the highlight channel is displayed at the bottom of the screen. This
will give specific information concerning the present status of the channel or the reason that an error
condition exists on this channel.
At the bottom of the screen are Module Status and System Status. The Module Status will display the
current status of the module that is selected for display. This System Status will display the current
status of all Programmable Limit Switch modules connected to the system.