Rocktron Chameleon On-Line - Manual (Page 14)

11
Each Chameleon preset is divided up into individual blocks called functions (such as
"Mixer", "Reverb", etc.). Within each function of each configuration is a set of controls
which allow you to manipulate various aspects of that function. These controls are called
parameters. It is the setting of each of the parameters which determines the overall sound
of each preset.
The Chameleon is set up to allow you to first access each function (via the FUNC-
TION SELECT control), then the parameter list for each function (via the PARAMETER
SELECT control) and finally the adjustable value for each parameter (via the PARAM-
ETER ADJUST control).
The functions available for each preset are dependent upon which configuration is
currently recalled. The remainder of this section will describe each of the effect-based
functions and the associated adjustable parameters they provide.
The remaining functions are utility-based, and are described in the section titled
"Operating the Chameleon".
STEP 2:
Turn to select a parameter
within the function.
STEP 1:
Turn to select
a function.
STEP 3:
Turn to alter the value of
the selected parameter.
Chameleon Functions and Parameter Descriptions