Rocktron Chameleon On-Line User Manual
Page 91
Advertising
88
safe place. Turn the PARAMETER SELECT control to continue.
Step 1
To reload user data from a sequencer:
Connect a standard MIDI cable from the MIDI OUT of the transmitting sequencer to the MIDI
IN on the receiving Chameleon.
IMPORTANT:
Do not allow a looping connection from the MIDI OUT/THRU of the receiving
Chameleon back to the MIDI IN of the transmitting sequencer.
Turn the FUNCTION SELECT controls on both the receiving Chameleon until "MIDI DUMP/
Step 2
MIDI DUMP/LOAD
Step 3
LOAD" is displayed.
Turn the PARAMETER SELECT controls on the receiving Chameleon until "BULK DUMP/
BULK DUMP/LOAD
Advertising