Rocktron Chameleon On-Line - Manual (Page 89)

86
To dump the Chameleon memory into a sequencer:
Step 1 Connect a standard MIDI cable from the MIDI OUT of the transmitting Chameleon to the MIDI IN on
the receiving sequencer.
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving
Chameleon back to the MIDI IN of the transmitting Chameleon.
Turn the FUNCTION SELECT controls on the transmitting Chameleon until "MIDI DUMP/LOAD" is
displayed.
Turn the PARAMETER SELECT control on the transmitting Chameleon until "BULK DUMP/LOAD"
is displayed.
Step 2
Step 3
Start the sequencer recording. Step 4
MDI DUMP/LOAD
BULK DUMP/LOAD
RECORD