Rocktron Chameleon On-Line - Manual (Page 94)

91
!! CAUTION !!
Pressing the STORE button at this time will overwrite
the current preset with the displayed factory preset.
Press the STORE button to begin restoring the selected preset into the selected location. After the
process is completed, the display should read "ERRORS 0". This represents the number of bytes that
the Chameleon found did not initialize properly. Any number of errors other than "0" means that the
Chameleon may not have initialized properly and the process should be repeated.
Step 5
ERRORS 0
The Chameleon will remain in this condition until the FUNCTION SELECTcontrol is turned to exit the Factory
Restore function. The preset currently recalled will be the preset most recently restored into the current location.